YY/T 1477.4-2017 Translated English of Chinese Standard. (YYT 1477.4-2017, YY/T1477.4-2017, YYT1477.4-2017): Standard test models for primary wound dressing performance evaluation - Part 4: In vitro wound model for adhesion properties evaluation of dressingshttps://www.chinesestandard.net, 01.09.2018 - 13 Seiten The in vitro wound model presented in this Part of YY/T 1477 is used to evaluate and compare the potential adhesion properties of wound dressings in vitro. This Part is applicable to the evaluation of the adhesion between the wound contact layer of the dressing and the wound. |
Häufige Begriffe und Wortgruppen
6-well cell culture adhesion of dressings adhesion properties evaluation adhesion resistance bovine serum albumin Briquetting block cell culture plate Center for Medical clamps constant temperature-humidity chamber developed based different dressings dissolved dressing performance evaluation Dressing sample Drying oven evaluate the performance evaluate the potential evaluation method evaluation of dressings fibrinogen Figure A.2 Four dressings Dressing given in Appendix Inspection Center maximum peel force Medical Devices method given mg/mL model application model fibrin clot model for adhesion model given model to evaluate models for primary patent rights peel force required peel the dressing performance between dressings phosphate buffer solution potential adhesion properties primary wound dressing properties of wound repeatability of model required to peel resistance of Dressing serum albumin BSA Shandong Standard test models support 180 tensile tester Terms and definitions Test devices test dressings thrombin type of dressing vitro wound model wound contact wound dressing performance Wound model fibrin YY/T Zhang