GB/T 1690-2010 Translated English of Chinese Standard (GBT 1690-2010, GB/T1690-2010, GBT1690-2010): Rubber, vulcanized or thermoplastic - Determination of the effect of liquidshttps://www.chinesestandard.net, 27.05.2017 - 28 Seiten This standard specifies the methods of evaluating the resistance of vulcanized and thermoplastic rubbers to the action of liquids by measurement of properties of the rubbers before and after immersion in test liquids. The liquids concerned include current service liquids, such as petroleum derivatives, organic solvents, and chemical reagents, etc. This standard applies to vulcanized rubber or thermoplastic rubber. |
Inhalt
| 3 | |
Introduction | 6 |
Scope | 8 |
Test device | 9 |
Test liquids | 11 |
Test pieces | 12 |
Temperature and duration of test liquid immersion | 14 |
Test report | 22 |
Appendix A Normative Reference liquid | 24 |
Appendix B Normative Reference liquid | 28 |
Häufige Begriffe und Wortgruppen
102 service liquid 103 service 2,4-trimethylpentane isooctane adopted international standard air after immersion aniline point ASTM No.1 calculate the percentage Change in hardness Change in mass change in surface change in volume Composition Volume fraction constant weight density distilled water domestic No.1 dynamic viscosity effect of liquids equation extractable matter grams g hydrocarbon IMMERSE the test immersed test piece immersion temperature initial mass interval between vulcanization kinematic viscosity mass change mass fraction maximum absorption median value Methanol mineral oil modified and adopted naphthenic Normative references percentage change Petroleum products piece after immersion piece before immersion provisions of GB/T Reference liquid refractive index replace ISO REPORT the result Requirements Properties Test sinker solvent extraction standard laboratory temperature standard oils Standard simulated liquid standard to replace surface area Table A.3 tensile stress-strain properties test liquid test piece thickness thermoplastic rubber three test pieces Toluene volume change vulcanization and testing vulcanized or thermoplastic